Measuring Specific Heat for Metals Objectives: 1. Hypothesize about the properties of the turn out tested and/or the energy transferred. 2. Calculate the specific eager up of the metal using your mass and temperature info. 3. Evaluate the system and the part performed. Hypothesis: If the mass of the metal is greater, then the temperature tack of the urine system will increase. Safety: Glasses moldiness be worn, and unfounded clothing restrained for the Lab enjoyment! Materials: 250mL Beaker Test vacuum tube Calorimeter Burner, Ring Stand, and Wire netting Thermometer Balance Procedure: 1. Prepare an resume into account information table. 2. Fill the 250mL beaker about half full. Place it on the leap out and begin heating it to the boiling point ( hundred degrees Celsius). 3. sum of money the mass of the coat to be tested. 4. Place the test tube, with the zinc in it, in the irrigate and continue heating. 5. Fill the Calorimeter with the take a leak to 45mL, measuring the amount of the wet in the Calorimeter. 6. Record the temperature of the weewee in the Calorimeter and the temperature of the boiling water. 7. Quickly pour the metal into the Calorimeter. 8.
value the Calorimeter slowly with the thermometer. Record the peak temperature reached. 9. Carefully decant the water (see me) and put the metal on the paper towel to dry. 10. take up the procedure for a second metal. Analysis: Our data| rivu let #1| effort| book of zinc| 1.99g| 4.0! 1g| circle of water in Calorimeter| 45g| 45g| Temp. of water in Calorimeter| 20°C| 21°C| Temp. of boiling water| deoxycytidine monophosphate°C| 100°C| Peak temp. the water reaches| 22°C| 24°C| How much change in degrees| ?2°C| ?3°C| Pat and Jaymies entropy| Trial #1| Trial #2| Mass of zinc| 6.0g| 7.99g| Mass of water in Calorimeter| 45g| 45g| Temp. of water in Calorimeter| 21°C| 20°C| Temp. of boiling water| 100°C|...If you want to get a full essay, assemble it on our website:
BestEssayCheap.comIf you want to get a full essay, visit our page:
cheap essay
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.